Hardinge L18 Quick Change Tool Post with 8 Holders 6 X L21 1 X L23 1 X L19

Hardinge L18 Quick Change Tool Post with 8 Holders 6 X L21 1 X L23 1 X L19. Set shows signs of age and use. The T slot measures 1 1/8" x 1 1/8" x 3/16 thickness.

Has a 3/4 diameter circle in the middle. The threads at the top look pretty chewed up. May need to be rethreaded.

I believe this was used on an HLV-H lathe. The L21 holders have a 7/16 capacity, 1 has been modified to a 7/8 capacity. The L23 boring bar holder has a capacity of 5/8 and has a bushing for 1/2 that can be removed. I measured the cutoff blade holder at.

Unfortunately, I couldn't remove the bolts securing blade with an allen wrench. Will most likely need to be put in a vice and impacted out.

Please review all photos to determine condition and identification. Some of the holders are missing set screws and other hardware, please review photos.

---